Emmeti Underfloor Heating Components

The Topway Plus Type 2 manifold is a pre-assembled stainless-steel manifold for use with underfloor and wall hung radiator systems available with b...

The FMU-3 Floor Mixing Unit is a pre-assembled control group and stainless-steel manifold assembly of between 2 and 12 ways, incorporating the TM3-...

M3V-HE Control group for use with Topway T2 manifolds, options for fixed or variable water temperature control for low temperature heating. Include...

Unique single piece 24×19 nickel-plated connectors suitable for connecting PEX/PERT pipe of various sizes to Emmeti manifolds. Not suitable for use...

Unique single piece 24 x 19 nickel-plated connectors suitable for connecting Multi-layer composite pipe of various sizes to Emmeti manifolds. Note:...

A 230V touchscreen programmable thermostat for Underfloor and Wall Hung Radiator systems. Features include touch screen operation, remote sensing f...

The Emmeti EWC-4 is a compact, 4 way 230V wiring centre designed for small UFH and WHR systems. Allows central connection of all system components ...

The Emmeti EWC-2 is a more commercially priced wiring centre available in 8 way and 12 way, 230V versions. Designed to allow central electrical con...

16 x 2mm three layer barrier pipe constructed of polyethylene of raised temperature (PE-RT) inner and an EVOH outer layer. For Heating applications...

Alpert MultiLayer Composite Pipe (MLCP), due to its excellent strength and flexibility, is commonly used in Underfloor Heating and low temperature ...

An Electrothermic Head is a 2 port valve that once the room thermostat has energised it, will open and close the port to the underfloor loop.It is ...

Electronic dial operated thermostat with changeover contacts available in 230v and 24v versions. Temperature differential 0.5DegC. LED provides cal...

Three types of mounting rail to cater for pipes from 16mm to 20mm: Clip Rail without self adhesive tape, Clip rail with adhesive and Clip rail with...

A range of 16-20mm staples designed for use with the Emmeti Tacker gun. Available in three lengths and as single or double hooked staples. DOWNLOAD...

A range of clips for manual fixing pipe sizes from 16mm to 20mm OD. Enables manual installation of pipe to the insulating layer. Material is Polypr...

Designed to provide an expansion and insulation layer between the wall and screed floor layer. Available in 2 widths 150mm and 130mm, both are 8mm ...

(*) Use the appropriate washer (90008200 or 90008210) shown below whenordering these items. WRAS Approved - Certificate Number: 1507073

With ½” female connections for manual or automatic air vent , drain/fill valves, pressure gauges or temperature/pressure gauges. The 1” M connectio...

The 27mm-30mm AF spanner is designed to easily tighten the takeoff connections in the 36mm interaxial space provided. The 30mm jaw is designed for ...

230V, 300N Force. Suitable for above mixing valve for weather compensating kit only 1”, 1¼” and 1½” only. DOWNLOADS Technical Product Guide RCE Con...

Electronic 3-point actuator for use with weather compensating kit 28139070. DOWNLOADS Technical Product Guide RCE Controller Jan 2015

PN 16 class, body in bronze, spindle in steel and O-rings in EPDM. Complete with unions. These valves are intended for use with weather compensatin...

38mm AF spanner to be used for the tightening of Monoblocco connectors 32x1.5 on the takeoff connections of Topway manifolds with 50mm connector sp...

Actuator for 3 Way Mixing Valve - 24V, 0 - 10V. 200N Force. Suitable for 3-way mixing valve for weather compensating kit only 3/8”, ½” and ¾” only....