Emmeti Underfloor Heating Components

Unique single piece 24×19 nickel-plated connectors suitable for connecting PEX/PERT pipe of various sizes to Emmeti manifolds. Not suitable for use...

Unique single piece 24 x 19 nickel-plated connectors suitable for connecting Multi-layer composite pipe of various sizes to Emmeti manifolds. Note:...

16 x 2mm three layer barrier pipe constructed of polyethylene of raised temperature (PE-RT) inner and an EVOH outer layer. For Heating applications...

Alpert MultiLayer Composite Pipe (MLCP), due to its excellent strength and flexibility, is commonly used in Underfloor Heating and low temperature ...

Three types of mounting rail to cater for pipes from 16mm to 20mm: Clip Rail without self adhesive tape, Clip rail with adhesive and Clip rail with...

A range of 16-20mm staples designed for use with the Emmeti Tacker gun. Available in three lengths and as single or double hooked staples. DOWNLOAD...

A range of clips for manual fixing pipe sizes from 16mm to 20mm OD. Enables manual installation of pipe to the insulating layer. Material is Polypr...

Designed to provide an expansion and insulation layer between the wall and screed floor layer. Available in 2 widths 150mm and 130mm, both are 8mm ...

Alpert MultiLayer Composite Pipe (MLCP), due to its excellent strength and flexibility, is commonly used in Underfloor Heating and low temperature ...

Designed as an alternative to clip rails or staples as a method for holding pipe in place. The panels are non-insulated and are designed to lay on ...

Blue classic floor insulating panel in polystyrene (EPS), with castellated surface bosses and tongue-and-groove edges, with polystyrene 0.16mm film...

White classic floor insulating panel in polystyrene (EPS), with castellated surface bosses and tongue-and-groove edges, no film, pipe spacing: 75mm...

For use with spreader plates. Designed to allow a closed bend at the end of each loop. Made from Expanded Polystyrene. DOWNLOADS Technical Product ...

Designed for systems where a low overall height is required. Most commonly fitted on existing floors and refurbishments. Silver coloured dry floor ...

Designed for systems where a low overall height is required. Most commonly fitted on existing floors and refurbishments. Silver coloured dry floor ...

Flarer and calibrator for Multilayer pipe.

Supplied as a 10 metre roll, 1 metre wide. Made of moulded expanded polystyrene (EPS) for thermal insulation, with an upper layer of aluminium / HD...

Designed for use with Dry Installation Systems to provide load bearing capability. Sold as 3.6sqm Pack. (*) Without adhesive side - (**) With adhes...

Complete with ½” F Fitting for air release valve (provided standard) or pressure gauge (optional).

Manual Twist Pipe clip, for pipe 16mm-18mm with 50 pieces per pack, designed to be hand threaded into insulation to anchor the pipe. DOWNLOADS Tech...

Unique single piece 24 x 19 nickel-plated connectors suitable for connecting copper pipe of various sizes to Emmeti manifolds. DOWNLOADS Technical...

Unique single piece 24×19 nickel-plated connectors suitable for connecting plastic PB polybutylene pipe of various sizes to Emmeti manifolds. DOWN...

Unique single piece 32 x 1.5 nickel-plated connectors suitable for connecting Multi-layer composite pipe of various sizes to Emmeti manifolds. Note...

Used to protect and support pipe between the manifold and where it enters the floor. Smaller size includes a fixing lug.  DOWNLOADS Technical Produ...