140sqm Screed Floor Cliprail Underfloor Heating Kit for Heat Pumps - Standard Output (200mm Centres)

£1,403.00
SKU UFHK02449
Zones
Thermostat
Pipe
Arcus Underfloor Heating Kits are made up exclusively from high quality components, and contain everything you need to complete your underfloor heating installation.
  • Underfloor heating system for a screed floor
  • Cliprail and clips system
  • Designed with 200mm pipe centres for average heat loss areas
  • Contains all the equipment you need for your underfloor heating installation
  • Suitable for the DIY installer

Underfloor Heating Kit Options

Zones

This is the number of independent thermostatically controlled areas. This underfloor heating kit is customisable between 1 and 8 zones.

Thermostat

This is the unit that controls the temperature in each zone. This underfloor heating kit has a choice of 6 different thermostats. We recommend the Emmeti Touch CS-17 thermostat.

Pipe

This underfloor heating kit has a choice of 2 different types of pipe - PERT and PERT-AL-PERT. 

Need More Choice?

We can cater for pretty much any underfloor heating design requirement, so if you want to add further customisation to any element of your Underfloor Heating Kit, please give us a call before placing your order.

 

KIT CONTENTS

This Arcus underfloor heating kit contains the following components:

Clip Rail

1x 1m length per square metre of underfloor heating. Clip rail supplied with double barb and can be interconnected for ease of installation.

Pipe Fixing Clips

Single hook 57mm pipe staples for clipping pipe to the insulation before screed is laid. Minimum of 15 clips per square meter of underfloor heating supplied.

1" Pre-Assembled Stainless Steel Manifold with Individual Flowmeter Commissioning Valves

Each pre-assembled manifold includes 2x drain off/fill valves, automatic air vents, 6-bar pressure guage and 2x blanking plugs. Pre-mounted onto a double offset bracket at 210mm centres.

Manifold supplied with:

  • Pair of Monoblocco connectors for each manifold port
  • 1x pair of red and blue butterfly handle ball vaves
  • 1x 22mm pump valve

Lowara Ecocirc 25/6 - 130 Pump

1x Lowara Ecocirc 25/6 130 pump, the latest generation high efficiency circulator based on the proven shaftless motor design with ECM technology and permanent magnets. The new generation has improved efficiency and fulfill the requirements of ErP 2015.

Electrothermic Actuator Heads

1x 230V actuator heads supplied for each manifold port.

Edge Insulation

8mmx150mm edge strip insulation supplied in 25m rolls to prevent drafts between the floor and the walls.

Pipe

1x 100m coil of pipe per 20sqm of underfloor heating kit area. This underfloor heating kit has a choice of 2 different types of pipe - PERT and PERT-AL-PERT.

Wiring Centre

1x wiring centre. The wiring centre supplied will be either 4-way or 8-way depending on the number of zones and thermostat selected.

Thermostats

1x thermostat for each zoneThis underfloor heating kit has a choice of 6 different thermostats. We recommend the Emmeti Touch CS-17 thermostat.

 

ZONE CONTROLS

All Arcus underfloor heating kits are available with a range of thermostat options for controlling your underfloor heating system.

Depending on the number of zones you select for your underfloor heating kit, your underfloor heating kit will contain:

  • 1x thermostat for each zone
  • 1x wiring centre

Emmeti Touch CS-17 (RECOMMENDED)

The Emmeti Touch CS-17 is our recommended thermostat. This 230V touchscreen programmable thermostat has multiple features including touchscreen operation, temperature limiting function, frost protection and optimum start. The CS-17 is also capable of remote sensing for air and floor use out of the box, with a sensor probe included. This premium touchscreen controller looks great and represents excellent value.

All Emmeti Touchscreen thermostat kits are supplied with an Emmeti hard wired wiring centre.

Emmeti Dial

230V dial operated thermostat with LED and night setback operation. This basic dial thermostat provides reliable performance and excellent value.

All Emmeti Dial thermostat kits are supplied with an Emmeti hard wired wiring centre.

Emmeti Zona

Available April 2019.

Heatmiser Slimline-RF

Wireless battery-powered digital thermostat with multiple features including remote sensor (sensor probe not included), flexible programming and key lock facility. This wireless thermostat provides a great convenience and ease of installation.

All Heatmiser Slimline-RF thermostat kits are supplied with the Heatmiser UH8-RF wireless wiring centre.

Heatmiser neoStat

230V Heatmiser neoStat with multiple features including app control, self-learning, remote sensing (sensor probe not included), flexible programming and key lock facility. The neoStats have been designed to be slim and stylish, and offer compatibility with:

  • Google Assistant
  • Amazon Alexa
  • Apple Homekit

All Heatmiser neoStat kits are supplied with the Heatmiser hard wired wiring centre and a neoHub, which handles all of the network communication.

Heatmiser neoAir

Wireless battery-powered Heatmiser neoAir with multiple features including app control, self-learning, remote sensing (sensor probe not included), flexible programming and key lock facility. The neoAirs have been designed to be slim and stylish, and offer compatibility with:

  • Google Assistant
  • Amazon Alexa
  • Apple Homekit

All Heatmiser neoAir kits are supplied with the Heatmiser UH8 wireless wiring centre and a neoHub, which handles all of the network communication.

 

PIPE

All Arcus underfloor heating kits are available with a range of pipe options.

Your underfloor heating kit will contain:

  • 1x 100m coil of pipe per 20sqm

PE-RT 16mm x 1.8mm Barrier Pipe

PERT underfloor heating pipe provides reliable performance and excellent value. Supplied in 100m coils for ease of handling and installation.

All PERT underfloor heating kits are supplied with 2x bend supports for each manifold port.

PERT-AL-PERT Multilayer 16mm x 2mm Barrier Pipe

PERT-AL-PERT underfloor heating pipe contains a 0.2mm aluminimum core which allows the pipe to hold it's form, enabling the easiest of installations. Supplied in 100m coils for ease of handling and installation.

 

DOWNLOADS

Emmeti Underfloor Heating Sales Brochure