60sqm Screed Floor Cliprail Underfloor Heating Kit for Boilers - Standard Output (200mm Centres)
- Underfloor heating system for a screed floor
- Cliprail and clips system
- Designed with 200mm pipe centres for average heat loss areas
- Contains all the equipment you need for your underfloor heating installation
- Suitable for the DIY installer
Underfloor Heating Kit Options
This is the number of independent thermostatically controlled areas. This underfloor heating kit is customisable between 1 and 8 zones.
This is the unit that controls the temperature in each zone. This underfloor heating kit has a choice of 6 different thermostats. We recommend the Emmeti Touch CS-17 thermostat.
This underfloor heating kit has a choice of 2 different types of pipe - PERT and PERT-AL-PERT.
Need More Choice?
We can cater for pretty much any underfloor heating design requirement, so if you want to add further customisation to any element of your Underfloor Heating Kit, please give us a call before placing your order.
This Arcus underfloor heating kit contains the following components:
1x 1m length per square metre of underfloor heating. Clip rail supplied with double barb and can be interconnected for ease of installation.
Pipe Fixing Clips
Single hook 57mm pipe staples for clipping pipe to the insulation before screed is laid. Minimum of 15 clips per square meter of underfloor heating supplied.
FMU3 Floor Mixing Unit With Low Temperature Manifold Including Flowmeters
Designed for Underfloor heating the FMU-3 Floor Mixing Unit is a pre-assembled control group and stainless steel manifold assembly between 2 and 12 ways. Incorporating the TM3-R control group that uses an integrated mixing valve with a remote sensing actuator. The FMU-3 includes a high-efficiency Grundfos UPM3 Auto 7m pump.
The flow rail has a double regulated red sleeved 0 - 4 l/min flow meter per circuit that allows individual circuit flow regulation and isolation with visual flow indication. Return rail has blue capped integrated electrothermic body to accommodate an actuator per circuit.
Pre-assembled manifold includes 2x drain off/fill valves, automatic air vents, temperature guage and 2x blanking plugs. Pre-mounted onto a double offset bracket at 210mm centres.
Manifold supplied with:
- Pair of Monoblocco connectors for each manifold port
Electrothermic Actuator Heads
1x 230V actuator heads supplied for each manifold port.
8mmx150mm edge strip insulation supplied in 25m rolls to prevent drafts between the floor and the walls.
1x 100m coil of pipe per 20sqm of underfloor heating kit area. This underfloor heating kit has a choice of 2 different types of pipe - PERT and PERT-AL-PERT.
1x wiring centre. The wiring centre supplied will be either 4-way or 8-way depending on the number of zones and thermostat selected.
1x thermostat for each zone. This underfloor heating kit has a choice of 6 different thermostats. We recommend the Emmeti Touch CS-17 thermostat.
All Arcus underfloor heating kits are available with a range of thermostat options for controlling your underfloor heating system.
Depending on the number of zones you select for your underfloor heating kit, your underfloor heating kit will contain:
- 1x thermostat for each zone
- 1x wiring centre
Emmeti Touch CS-17 (RECOMMENDED)
The Emmeti Touch CS-17 is our recommended thermostat. This 230V touchscreen programmable thermostat has multiple features including touchscreen operation, temperature limiting function, frost protection and optimum start. The CS-17 is also capable of remote sensing for air and floor use out of the box, with a sensor probe included. This premium touchscreen controller looks great and represents excellent value.
All Emmeti Touchscreen thermostat kits are supplied with an Emmeti hard wired wiring centre.
230V dial operated thermostat with LED and night setback operation. This basic dial thermostat provides reliable performance and excellent value.
All Emmeti Dial thermostat kits are supplied with an Emmeti hard wired wiring centre.
Available April 2019.
Wireless battery-powered digital thermostat with multiple features including remote sensor (sensor probe not included), flexible programming and key lock facility. This wireless thermostat provides a great convenience and ease of installation.
All Heatmiser Slimline-RF thermostat kits are supplied with the Heatmiser UH8-RF wireless wiring centre.
230V Heatmiser neoStat with multiple features including app control, self-learning, remote sensing (sensor probe not included), flexible programming and key lock facility. The neoStats have been designed to be slim and stylish, and offer compatibility with:
- Google Assistant
- Amazon Alexa
- Apple Homekit
All Heatmiser neoStat kits are supplied with the Heatmiser hard wired wiring centre and a neoHub, which handles all of the network communication.
Wireless battery-powered Heatmiser neoAir with multiple features including app control, self-learning, remote sensing (sensor probe not included), flexible programming and key lock facility. The neoAirs have been designed to be slim and stylish, and offer compatibility with:
- Google Assistant
- Amazon Alexa
- Apple Homekit
All Heatmiser neoAir kits are supplied with the Heatmiser UH8 wireless wiring centre and a neoHub, which handles all of the network communication.
All Arcus underfloor heating kits are available with a range of pipe options.
Your underfloor heating kit will contain:
- 1x 100m coil of pipe per 20sqm
PE-RT 16mm x 1.8mm Barrier Pipe
PERT underfloor heating pipe provides reliable performance and excellent value. Supplied in 100m coils for ease of handling and installation.
All PERT underfloor heating kits are supplied with 2x bend supports for each manifold port.
PERT-AL-PERT Multilayer 16mm x 2mm Barrier Pipe
PERT-AL-PERT underfloor heating pipe contains a 0.2mm aluminimum core which allows the pipe to hold it's form, enabling the easiest of installations. Supplied in 100m coils for ease of handling and installation.
DOWNLOADSEmmeti Underfloor Heating Sales Brochure